Klarstein 10030663 Manual Del Usuario página 30

1. The Heineken connector that comes with your beer cooler can work with all Heineken 5 litre kegs.
However you must use a flat head screwdriver to remove the green base from the keg in order to install
the new connector, provided with the beer cooler.
2. When install the new connector to the Heineken keg, you must firstly install the clear beer tube one end
to the connector, one end to the tap mechanism, then install the connector to the Heineken keg.
Take out the Heineken adaptor with collect
ways, Press it according the arrow indication,
or will damage the fastener.
30