Use Of The Appliance - Teka TS1 130 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

connect the refrigerator to the electrical source and reset the control
to the desired setting.
LEVELING
If the refrigerator is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It
is very important of the refrigerator to be level in order to function
properly.
To level your refrigerator you may either turn the level leg clockwise
to raise that side to the refrigerator or turn counter – clockwise to
lower that side.
NOTE:
Having someone push against the top of the refrigerator take
some weight off the leveling leg. This makes it easier to adjust the
leveling leg.

USE OF THE APPLIANCE

To obtain the best possible results form your refrigerator, it is
important that you operate it properly.
Temperature Control
The temperature selector knob is located on the right hand side
wall of the refrigerator interior
Setting"Off" :UnitOff
Setting"Min" or"1" :Less Cool Temperature
Setting " Med " or " 3 " : Normal Operation(adequate for most
situations)
Setting"Max" or"6" :Coolest Temperature
◆During high ambient temperatures e.g. on hot summer days. It
may be necessary to set the thermostat to the Coolest
setting(position "Max" or "6").This may cause the compressor
running
7

Publicidad

Tabla de contenido
loading

Tabla de contenido