Festo CDVI Serie Manual De Instrucciones página 13

3 Controlling the valve terminal
Use a uniform method of control. Preferably, all control
signals should be positive−switching (1−switching), other
wise all control signals negative−switching (0−switching).
Mixed mode control is not permitted.
3.1 Address assignment of the valves
Assign the addresses in ascending order without gaps.
A valve location always occupies two addresses.
Counting begins from left to right.
0 1 2 3
Festo CDVI... 0302a English
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
13