Husqvarna T536 LiXP Manual De Instrucciones página 37

Chain catcher
Li-ion Li-ion
• Check that the chain catcher is not damaged and is
firmly attached to the body of the chainsaw.
Keypad
• Activate the chain saw (green LED on) and make sure
the chain saw deactivates when the start/stop button
is pressed (green LED off).
Battery connectors
Li-ion Li-ion
Clean the battery and the machines battery compartment
with a soft brush after use. Make sure all cooling slots and
battery connectors are cleaned.
MAINTENANCE
Cooling system
To keep the working temperature as low as possible the
machine is equipped with a cooling system.
The cooling system consists of:
1 Air intake (left side of the machine).
2 A fan on the motor.
• Clean the cooling system with a brush once a week,
more often in demanding conditions. A dirty or
blocked cooling system results in overheating which
causes damage to the machine.
Battery
• Make sure the battery is not damaged or deformed
and that there are no visible defects such as cracks.
Battery charger
• Make sure the battery charger and the power supply
cord is not damaged or deformed and that there are
no visable defects such as cracks.
Li-ion Li-ion
Li-ion Li-ion
Li-ion Li-ion
–
English 37