Technical Data; Recommended Cutting Equipment For Usa; Recommended Cutting Equipment For Canada - Husqvarna T536 LiXP Manual De Instrucciones

Ocultar thumbs Ver también para T536 LiXP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Technical data

Engine
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, US pint/litre
Weight
Chain saw without battery, bar and chain, empty chain oil tank, lb/kg
Chain/bar
Recommended bar lengths, inch/cm
Usable cutting length, inches/cm
Drive sprocket type/teeth
Maximum chain speed / (savE), m/s
Approved batteries for T536 LiXP.
Battery
Type
Battery capacity, Ah
Voltage, V
Weight, lb/kg
Battery runtime, min, (free run) with SavE
activated
Approved chargers for the specified batteries, BLi.
Battery charger
Input Voltage, V
Frequency, Hz
Power, W

Recommended cutting equipment for USA

Following is a list of recommended cutting equipment for Husqvarna cordless chain saw model T536 LiXP. This chain
saw model equipped with either of the listed guide bar and saw chain combination(s), fulfills the requirements according
to UL 1662 - 2009 and UL 60745-1 - 2011.
Chain saw model Husqvarna T536 LiXP met the kickback performance requirements of ANSI B175.1-2012 when tested
with the combinations of bars and saw chains listed below. The saw chain Husqvarna H38 is also classified as a low
kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B175.1-2012. We
recommend to use only the listed combinations of bars and chains for chain saw model Husqvarna T536 LiXP. Other
chain saw models may not meet the kickback requirements when equipped with the listed guide bar and saw chain
combinations.

Recommended cutting equipment for Canada

Following is a list of recommended cutting equipment for the Husqvarna cordless chain saw model T536 LiXP. The listed
combination(s) of powerhead, guide bar and saw chain meet all requirements outlined in Canadian Standards
Assosiation Z62.1-11 (Chain Saws) and Z62.3-11 (Chain Saw Kickback).
40 – English
TECHNICAL DATA
BLi110
Lithium-ion
3.0
36
2.6/1.2
35
QC120
100-120
50-60
125
T536 LiXP
BLDC (brushless) 36V
savE
Automatic
0.42/0,20
5.3/2,4
10-14/25-35
9-13/23-33
Spur/6
20 (15)
BLi150
Lithium-ion
4,2
36
1.3
35
QC330
100-240
50-60
330

Publicidad

Tabla de contenido
loading

Tabla de contenido