Installation - Defiant DFI-0452-WH Guía De Uso Y Cuidado

Installation

Determining the mounting
1
location
NOTE: The light fixture should be mounted approximately
8 ft. (2.4 m) above the ground.
NOTE: Ensure the fixture and the solar panel are located
close enough together for the cord to reach. You can also
add on an extension cord. Ensure the solar panel faces
South.
□ Determine the mounting location - wall or eave
mount.
□ Position the lamp head (A) in the general direction
of the desired light coverage.
A
Wall Mount Eave Mount
Incorrect
Setting the sensor for wall
2
or eave mounting
NOTE: Adjust the sensor angle to a coverage
desired.
□ For wall mounting, tilt the sensor (C) down 10
degrees to cover up to a 50 ft. range in front.
□ For eave mounting, turn the sensor (C) either
clockwise or counterclockwise to the desired
position.
6
C
C