Removing The Mounting Plate; Installing The Mounting Plate; Mounting The Light Fixture - Defiant DFI-0452-WH Guía De Uso Y Cuidado

Installation (continued)
3

Removing the mounting plate

NOTE: Make sure there is enough vertical space above
the mounting plate to allow the light fixture to be mounted.
□ Press the wall mounting plate (D) and slide the
mounting plate (D) from the light body (B).
B
5

Mounting the light fixture

□ Slide the rear of the light fixture (B) down onto the
mounting plate (D) until it snaps into place.
D
7
4

Installing the mounting plate

NOTE: Make sure there is enough vertical space
above the mounting plate to allow the light fixture to
be mounted.
Place the mounting plate (D) against the mounting
surface and ensure the mounting plate (D) is level.
Mark the hole locations on the mounting surface,
through which the mounting screws (AA) will be
threaded.
□ If mounting to a wooden surface, drill two
3/32 in. holes into the mounting surface.
Install the two mounting screws (AA) through
the mounting plate (D) and into the mounting
surface.
□ If mounting to wall board or brick, drill two
7/32 in. holes into the mounting surface.
Insert the wall anchors (BB) and attach the
mounting plate (D) using the two mounting
screws (AA).
D
AA
Please contact 1-866-308-3976 for further assistance.
BB
B
D
HOMEDEPOT.COM