Circle Vial; Laser Plummet - Prexiso T.O.2 Manual Del Usuario

5.2 Circle Vial

Inspection and
Adjustment

5.3 Laser Plummet

Turning the laser
plummet on/off
Inspection
With turned on instrument turn on the laser plummet by pushing the
keyboard. To turn off the laser plummet, press the
1. Set the instument on the tripod (no adjustment is required).
2. Place the cross mark excactly under the instrument.
3. With turned on instrument turn on the laser plummet by pushing the
4. Turn the instrument for 180°.
Inspection and Adjustment
After making sure that the long water level is
correctly adjusted, check if there is any off-
center with the round water level. If there is
no off-center, no adjustment is required;
otherwise, adjust the three adjustment
screws with needle as shown to center the
bubble.
button again.
button on the
button.
T.O.2 | 31