Cleaning And Drying - Prexiso T.O.2 Manual Del Usuario

6.3 Cleaning and Drying

Objective, eyepiece
and reflectors
Charger and
batteries
Fogging of prisms
Damp products
• Blow dust off lenses and prisms.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth with
water or pure alcohol. Do not use other liquids; these may attack the polymer compo-
nents.
• Use only a clean, soft, lint-free cloth for cleaning.
Reflector prisms that are cooler than the ambient temperature tend to fog. It is not enough
simply to wipe them. Keep them for some time inside your jacket or in the vehicle to allow
them to adjust to the ambient temperature.
Dry the product, the transport container, the foam inserts and the accessories at a temper-
ature not greater than 40°C /104°F and clean them. Do not repack until everything is
completely dry. Always close the transport container when using in the field.
Care and Transport T.O.2 | 39