Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Selection
Indicator
Once the amplifier selection has been loaded, rotate the
selection knob until the selection indicator points to
"FACTORY DEFAULT" and press the center of the selection
knob once.
Next you will be prompted to confirm that you would like to
load the Factory Default Setting....Yes or No? To continue
make sure the solid arrow is point to YES and center of the
selection knob.
Once selected the NXLCDC will load the factory settings and
the prgress bar will show on the LCD screen . Please note
that this loads the factory settings for the selected amplifier
only. If you wish to restore the factory settings for the other
amplifiers in the system you must load them one by one.
F
ACTORY DEFAULT SETTING
The NXLCDC has a factory default setting. This feature
1
2
is used normally during production to test the NXLCDC.
3
4
However this feature is also useful if you wish restore
PC INPUT
NXLCDC
the factory settings as a good starting point for your
adjustments.
15
Publicidad
Tabla de contenido
