Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Appendix
Installation Precautions
Avoid installing the machine near computers or other precision
electronic equipment.
Electrical interference and vibrations generated by the machine while
printing can adversely affect the operation of such equipment.
Avoid installing the machine near televisions, radios, or similar
electronic equipment.
The machine might interfere with sound and picture signal reception.
Insert the power plug into a dedicated power outlet, and maintain as
much space as possible between the machine and other electronic
equipment.
IMPORTANT
When people or other objects approach the motion sensor provided
•
on the front of the main unit, the sensor detects them. If objects are
placed near the sensor or the machine is installed in a busy location,
the sensor's operation may become unstable.
The motion sensor uses ultrasonic waves, so it may be affected by
•
ultrasonic waves in ambient sound.
•
If you feel that something is wrong with the motion sensor, change
the sensitivity setting with [Settings/Registration] > [Preferences] >
[Timer/Energy Settings] > [Use Motion Sensor] > [Sensor Sensitivity]
or turn OFF the sensor.
Moving the Machine
If you intend to move the machine, even to a location on the same floor
of your building, contact your local authorized Canon dealer beforehand.
Do not attempt to move the machine yourself.
Laser Safety Label
42
Fixing Unit
When removing jammed paper or when inspecting the inside of the
machine, do not expose yourself to the heat emitted from the fixing unit
and its surroundings for a prolonged period of time. Doing so may result
in low temperature burns, even though you did not touch the fixing unit
and its surroundings directly.
Publicidad
Capítulos
Tabla de contenido
