Installation Location And Handling; Installation Precautions; Avoid Installing The Machine In The Following Locations - Canon imageRUNNER ADVANCE C350P Guía De Inicio

Installation Location and Handling

This section describes precautions for installation location and handling. We recommend that you read this
section prior to using this machine.

Installation Precautions

Avoid Installing the Machine in the Following
Locations
Avoid locations subject to temperature and
humidity extremes, whether low or high.
For example, avoid installing the machine near water
faucets, hot water heaters, humidifiers, air conditioners,
heaters, or stoves.
Avoid installing the machine in direct sunlight.
If this is unavoidable, use
curtains to shade the
machine. Be sure that the
curtains do not block the
machine's ventilation slots
or louvers, or interfere with
the electrical cord or power
supply.
Avoid locations where a considerable amount
of dust accumulates./Avoid locations where
ammonia gas is emitted./Avoid locations near
volatile or flammable materials, such as alcohol
or paint thinner.
08

Installation Location and Handling

Avoid poorly ventilated locations.
This machine generates a slight amount of ozone
etc. during normal use. Although sensitivity to ozone
etc. may vary, this amount is not harmful. Ozone etc.
may be more noticeable during extended use or long
production runs, especially in poorly ventilated rooms.
It is recommended that the room be appropriately
ventilated, sufficient to maintain a comfortable working
environment, in areas of machine operation. In addition,
do not install this machine where it exhausts directly
onto a person.
Avoid locations that are subject to vibration./
Avoid exposing the machine to rapid changes in
temperature.
If the room in which the machine is installed is cold
but rapidly heated, water
droplets (condensation)
may form inside the
machine. This may result in
a noticeable degradation
in the quality of the copied
image, or the copies having
no printed image at all.
Avoid installing the machine near computers or
other precision electronic equipment.
Electrical interference and vibrations generated by
the machine during printing can adversely affect the
operation of such equipment.
Avoid installing the machine near televisions,
radios, or similar electronic equipment.
The machine might interfere with sound and picture
signal reception.
Insert the power plug into a dedicated power outlet,
and maintain as much space as possible between the
machine and other electronic equipment.