Honda CRF230F Manual Del Propietário página 102

CRF230F • CRF230F (U Type)
3. To position the brake lever farther away from
the handgrip, turn the adjuster (4) clockwise.
To position the brake lever closer to the handgrip,
turn the adjuster counterclockwise.
4. Tighten the lock nut. Return the dust cover to its
normal position.
5. Apply the brake, release it, then spin the wheel
and check that it rotates freely. Repeat this
procedure several times.
6. Check free play by pulling in slowly on the front
brake lever until the brake starts to engage.
Free play:
10 – 20 mm (0.4 – 0.8 in)
If brake lever free play is not within this range, see
your Honda dealer.
(2)
(3) (4)
(1) Front brake lever
(1)
(2) Dust cover
(3) Lock nut
(4) Adjuster
Other checks
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
Rear Brake
Pedal height adjustment
1. Place the motorcycle on its side stand.
2. The stopper bolt (1) is provided to allow
adjustment of the pedal height.
To adjust the pedal height, loosen the lock nut (2)
and turn the stopper bolt. Tighten the lock nut.
(1)
(2)
21
(1) Stopper bolt
(3) (2) Lock nut
(3) Rear brake pedal
(Cont.)