Cleaning; Washing The Motorcycle - Honda CRF230F Manual Del Propietário

74

CLEANING

Clean your motorcycle regularly to protect the
surface finishes and inspect for damage, wear and
oil leakage.
Avoid cleaning products that are not specifically
designed for motorcycle or automobile surfaces.
They may contain harsh detergents or chemical
solvents that could damage the metal, paint, and
plastic on your motorcycle.
If your motorcycle is still warm from recent operation,
give the engine and exhaust system time to cool off.
We recommend avoiding the use of high pressure
water spray (typical in coin-operated car washes).
NOTICE
High pressure water (or air) can damage certain parts
of the motorcycle.
High pressure washer spray can damage certain parts
of your motorcycle. If you use a high pressure washer,
avoid spraying the following areas:
Wheel hubs

Muffler outlet

Under seat

Engine stop button

Under fuel tank

Drive chain

Carburetor

Ignition switch

Brake master cylinders


Washing the Motorcycle

1. Rinse the motorcycle thoroughly with cool water
to remove loose dirt.
2. Clean the motorcycle with a sponge or soft cloth
using cool water.
Avoid directing water to muffler outlets and
electrical parts.
3. Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent
and water. Rub the soiled area gently rinsing it
frequently with fresh water. Take care to keep
brake fluid or chemical solvents off the motorcycle.
They will damage the plastic and painted surfaces.
4. After cleaning, rinse the motorcycle thoroughly
with plenty of clean water. Strong detergent
residue can corrode alloy parts.
5. Dry the motorcycle, start the engine, and let it run
for several minutes.
6. Test the brakes before riding the motorcycle.
Several applications may be necessary to restore
normal braking performance.
CRF230F • CRF230F (U Type)