Descargar Imprimir esta página

Clearing A Staple Jam; Technical Specifications - Rapid DUAX Manual Para El Usario

Publicidad

Idiomas disponibles

Idiomas disponibles

Clearing a staple jam

If the handle is not completely pushed down, the staple will most likely become jammed in the stack
of papers. In this event, leave the stack in place, open the magazine, remove the staples and then
close the magazine. Then repeat the stapling operation, ensuring the handle is pushed completely
down. This will cut and release the staple from the stapler, allowing the stack of papers to be removed.
Removing staple trimmings
Duax staples are "cut" during the stapling process. These trimmings fall into a reservoir within the
Duax. This reservoir must be emptied each time a new box of Duax staples are used. Simply remove
the orange cap on the front section of the stapler and empty trimmings into the garbage.
See illustration.

Technical specifications

Capacity:
2-170 sheets (80 gsm)
Stapling depth:
67 mm
Staple type:
Rapid DUAX
Staple magazine:
100 staples (full-strip)
Stapling method:
flat clinching
Dimensions:
length 361 mm, width 109 mm, height 266 mm
Weight:
2450 g
®
staple
3
GB

Publicidad

loading