Troubleshooting - Olympia A 296 Manual De Instrucciones

Troubleshooting

Fault
LED does not light up
Unit does not respond
Laminating pocket jam
Laminated foil is not completely
transparent
Corrective measures
Check that the power plug has
been properly connected to the
power socket.
If the fault cannot be cleared, con-
tact our hotline.
Check the foil pockets being used
are the correct size.
Only use foil pockets of the sizes
prescribed.
Ensure that the foil pocket has
been inserted correctly in the unit.
To clear the fault, follow the in-
structions in the Section "Clearing
Foil Jams".
Laminate the same foil again to
improve the lamination result.
Conformity of the equipment to the
EU directives is confirmed by the CE
symbol.
16