Assembly And Use For The Nutri Ninja; Important; Cup - Ninja BL740 Guia Del Usuario

Assembly and Use for the Nutri Ninja

WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
CAUTION: DO NOT BLEND HOT FOODS OR HOT LIQUIDS.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the Nutri Ninja
3 Place the Nutri Ninja
®
tightly until you have a good seal. (Fig. 1)
4
Turn the Nutri Ninja cup upside down and place it
®
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
5
Press down on the Single Serve
activate. (Fig. 3)
intervals to
13 1-877-646-5288
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!

cup.

®
blade onto the cup and screw it
cup clockwise to
®
button in short
Cup
®
USE
Fig. 4
6 When you have reached your desired consistency, stop the
appliance by removing your hand from the
button. Then turn the Nutri Ninja
clockwise (Fig. 4) and pull straight up to remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
7 Turn the cup upright and remove the Nutri Ninja
by twisting the blade assembly to the left.
8
Place the To-Go drinking lid onto the Nutri Ninja
twist to seal and enjoy!
9
Make sure that the motor base is unplugged when not
in use.
REMOVAL
Fig. 5
Single Serve
cup turn it counter-
®
®
®
blade
cup,