Assembly And Use Of The Nutri Ninja Cup - Ninja BL740 Guia Del Usuario

Assembly and Use of the Nutri Ninja
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor base
to make sure that the suction cups adhere to the counter or
table top.
3 Add ingredients to the Nutri Ninja cup.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5
Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6
Press down on the Single Serve
activate. (Fig. 3)
intervals to
13 1-877-646-5288
USE
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
button in short
Cup
®
Fig. 4
7 When you have reached your desired consistency, stop the
appliance by removing your hand from the
button and wait for the blade assembly to stop
the Nutri Ninja cup counter-clockwise (Fig. 4) and pull
straight up to remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
8
Turn the cup upright and remove the Nutri Ninja blade
by twisting the blade assembly to the left.
9
Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
REMOVAL
Fig. 5
Single Serve
turning. Turn