Assembly And Use For The Pitcher; Important - Ninja BL771 Guia Del Usuario

Assembly and Use for the Pitcher

Assembly
Fig. 1
Fig. 2
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Pitcher onto the motor
base. (Fig. 1) Handle should be aligned
slightly to the right of the "LOCK" symbol on
the motor base.
3 Rotate the pitcher clockwise as far as it will
go to lock in place. (Fig. 2)
4 The pitcher can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(Fig. 3a, Fig. 3b)
5 Holding the 6-Blade Assembly by the top of
the shaft, place it onto the drive gear inside
the pitcher. Ensure that the attachment is
seated properly and is standing upright.
(Fig. 4)
NOTE: The blade will fit loosely on the drive
gear.
Fig. 3a
Fig. 3b
6 Add the ingredients to the pitcher, making
sure that they do not exceed the highest
measured marking line on the side of the
pitcher.
NOTE: If you need to add additional
ingredients while the appliance is processing,
open the pour spout cap and pour the
ingredients in through the opening.
7 Plug the power cord into the electrical outlet
and press the power button ( ).
NOTE: As a safety feature, the power
button ( ) will flash and the motor will
not work if the pitcher and lid are not
installed correctly. When the pitcher
and lid are installed properly, the power
button ( ) will be solid, indicating that
the appliance is ready for use.
8 Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning
the arrow ( ) located on the lid with the
arrow ( ) located on the pitcher's handle.
(Fig. 5) Press the handle down until you hear
a click.
Fig. 4
Fig. 5
www.ninjakitchen.com
13