Cleaning And Maintenance - Princess 242124 Manual De Instrucciones

Ocultar thumbs Ver también para 242124:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60

Cleaning and maintenance

Warning!
- Before cleaning or maintenance, always
switch off the appliance and remove the
mains plug from the wall socket.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Caution! Do not use aggressive or abrasive
cleaning agents to clean the appliance and the
various parts of the appliance.
Regularly check the appliance for possible
damage.
Use a damp cloth to clean the outside of
the appliance. Use a clean, dry cloth to dry
the appliance.
Clean the dispenser cassette in soapy water.
Clean the coffee pad cassette and the
ground coffee cassette in soapy water.
Clean the cup tray and the drip tray in soapy
water.
Clean the water reservoir and the lid of the
water reservoir in soapy water.
Rinse the accessories under running water.
Rinsing the appliance
(fig. A, B, D & E)
The appliance must be rinsed if it has not
been used for a couple of days. Always start
rinsing the appliance directly after switching on
in order to decrease energy consumption.
Warning! Be careful with hot water and steam
to avoid burns. Hot steam can escape from
the milk froth dispenser during the process.
Caution!
- Before rinsing the appliance, make sure that
the milk frothing unit is assembled and
mounted correctly.
- Before rinsing the appliance, make sure that
the water reservoir is placed in the appliance.
Rinse the water reservoir (17).
Make sure that the cover (20) of the filter
holder (21) is correctly placed in the water
reservoir (17).
Place the lid (19) on the water reservoir (17).
Fill the water reservoir (17) with water up to
the maximum mark in the filling opening of
the lid (19).
Place the water reservoir (17) in the
appliance.
Set the beverage selector (7) to position 'A'
or 'B'.
Insert the coffee pad cassette (13) into the
appliance.
Set the locking collar (8) to position 'A'.
dispenser (10).
Make sure that the milk frothing unit is
assembled and mounted correctly.
Press the on/off button (1) to switch on the
appliance.
Simultaneously press on/off button (1) and
the start/stop button (2) to start the rinsing
process.
If the process is completed, set the locking
collar (8) to position 'B'.
Cleaning the coffee dispenser
filter (fig. K)
The quality of the cream layer reduces when
the coffee dispenser filter is clogged by calcium
or coffee residue. The coffee dispenser filter
must be cleaned regularly.
Caution! If the two filters of the coffee dispenser
filter are pressed against each other, replace
the coffee dispenser filter.
Remove the dispenser cassette (9) from
the appliance.
Remove the coffee dispenser filter (28)
from the dispenser cassette (9).
Clean the coffee dispenser filter (28) in
soapy water using a soft brush to remove
coffee residue.
Pour a small amount of descaling agent
through the opening of the coffee dispenser
filter (28) to remove calcium.
Rinse the coffee dispenser filter (28) under
running water.
Mount the coffee dispenser filter (28) to the
dispenser cassette (9).
Mount the dispenser cassette (9) to the
appliance.
26

Publicidad

Tabla de contenido
loading

Tabla de contenido