Amica 10143.4TfDbJVQaS Manual De Uso página 70

OPERATION
Menu / Cleaning
Touch navigation sensor fields to select
cleaning from main menu and touch
following screen will be displayed:
If no changes are made within 3 minutes, the
appliance switches to standby mode.
Pour water into baking tray, close the door
and touch . sensor field to start the pro-
gramme. The programme is started. In box
2 of the preset programme COOK TIME
changes to END TIME and consequently
cook time of 0:30 is replaced with end time
and the remaining time is shown on the pro-
gress bar. Once the programmed cook time
has elapsed, all functions except cooling fan
are turned off (see: Cooling fan operation)
and an acoustic signal is sounded (4 beeps
/ pause / 4 beeps).
The sequence is repeated every 3 seconds
for about 5 minutes. The display shows the
temperature set for the oven chamber and
END TIME and
Touch to acknowledge and mute the aco-
ustic signal. After this, the appliance switches
to standby mode.
symbol is flashing.
Cooling fan operation
Cooling fan is started whenever oven cham-
The
ber temperature exceeds 50°C regardless of
any heating function operating or not. In order
for the cooling fan to be started both protec-
tion relay and cooling fan delay must be on.
Once cooking is finished the display shows
current time and oven chamber temperature
bar.
Lighting
According to an option selected in Menu /
Setup / Lighting, lighting is switched on when
any heating function is in operation. Regar-
dless of the option selected in Menu / Setup/
lighting, light illuminates continuously when
oven chamber door is opened and it turns off
when the door is closed.
Opening the door during cook time discon-
nects the heating elements and convection
fan motor (if used). Normal operation is
resumed after that door is closed.
70