Operation; Before Using The Appliance For The First Time - Amica 10143.4TfDbJVQaS Manual De Uso

OPERATION

Before using the appliance for
the first time
● Remove packaging, clean the interior of
the oven,
● Take out and wash the oven fittings with
warm water and a little washing-up liquid,
● Switch on the ventilation in the room or
open a window,
● Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wash the interior
carefully. (see section: Electronic pro-
grammer operation and oven control)
Important!
To clean the oven, only use a cloth
well wrung out with warm water to
which a little washing-up liquid has
been added.
Note!
Before using an oven whose type
contains the letter „O" check fitting of
the heating element in the oven's side
chamber walls. If the heating element
is not correctly fitted, lift it and insert
into the grooves in the chamber's
side walls.
Important!
Oven is equipped with a programmer
with display controlled by six sensor
fields located symmetrically on both
sides of the display. To activate each
sensor field, touch the glass above
the sensor (indicated by a pictogram).
An acoustic signal will be heard,
which was selected in the menu.
(See section: Electronic programmer
operation and oven control.)
Sensor field surfaces must be kept
clean.
51