Technical Information; Mechanical; Electrical; Audio Input/Output - Bose Personalized Amplification System PS1 Guia Del Usuario

Technical Information

Mechanical

Electrical

Audio Input/Output

30
Dimensions
• PS1 power stand: 26.0 W x 26.0 D x 5.0 H (66 cm x 66 cm x 12.7 cm)
• L1 Cylindrical Radiator™ loudspeaker (each section):
3.5 W x 4.0 D x 43.0 H (8.9 cm x 10.5 cm x 109.2 cm)
• R1 remote control: 2.8 W x 5.6 D x 1.6 H (7.1 cm x 14.1 cm x 4.0 cm)
• B1 bass module (optional):
10.3 W x 18.0 D x 15.3 H (25.0 cm x 45.7 cm x 38.0 cm)
Weight
• PS1 power stand: 35
• Lower L1 Cylindrical Radiator™ loudspeaker: 16.0
• Upper L1 Cylindrical Radiator™ loudspeaker: 14.5
• R1 remote control: 0.6
• B1 bass module (optional): 28
Impedance
• L1 Cylindrical Radiator™ loudspeaker: 4
• B1 bass module (optional): 8
AC power rating
• International: 220-240V
• Peak inrush current: 16A @ 230V
• Amplifier 1 output power (Amp 1 OUT): 250W (rms, into 4 ), assigned to
upper L1 Cylindrical Radiator™ loudspeaker or the Amp 1 OUT connector
• Amplifier 2 output power: 250W (rms, into 4 ), assigned to
lower L1 Cylindrical Radiator™ loudspeaker or the Amp 2 OUT connector
• Amplifier 3 output power: 250W (rms, into 4 ), assigned to one or two B1 bass
modules using the B1 Bass Module (Amp 3 OUT) connector
• Output level, Line OUT: Balanced XLR connection, +4dBu
• Output level, Bass–Line OUT:
• With a balanced TRS connection: -4dBu (nominal), +9dBu (max)
• With an unbalanced TS connection: -10dBu (nominal), +3dBu (max)
• Bass–Line OUT Frequency Response:
• With 1 or 2 B1 bass modules connected to B1 Bass Module (Amp 3 OUT): 40 -180Hz,
compensated for B1 bass module
• Without B1 bass modules connected to B1 Bass Module (Amp 3 OUT): 40 -180Hz,
flat bandpass
• Data Output: 48KHz, S/PDIF compatible interface. L=Channel 1 output, R=Channel 2
output.
(16 kg)
(0.27 kg)
(13 kg)
50/60Hz 1400W
60Hz
(7 kg)
(6 kg)