Disassembly - Bose Personalized Amplification System PS1 Guia Del Usuario

Setup

Disassembly

16
WARNING: Before disassembly, turn the power off and then remove the AC power cord and all
other cables from the PS1 power stand.
Remove the top L1 Cylindrical Radiator
loudspeaker section
Place one foot on the PS1 power stand to support
your back. Firmly grasp the top section with one
hand. Using your other hand, press the release
button with your thumb and remove the top section
from the bottom section.
Remove the bottom L1 Cylindrical
Radiator loudspeaker section
Using your foot, push down on the PS1 power
stand treadle and lift the bottom L1
Cylindrical Radiator™ loudspeaker section
up and out of the PS1 power stand.
TM