Technical Specifications; Description And Usage; Location Of Elements - Selecta AUTESTER ST DRY PV B 12L Manual De Instrucciones

INSTRUCTION MANUAL CODE 80369 REV 0
J
.P. SELECTA s.a.u.
JULY/2018

5 Technical specifications

Chamber inner dimensions (diameter x depth): ....................
Power supply: ..............................................
Sterilizing temperature/pressure: ........................
Sterilizing temperature/pressure: ........................
Power fuse: ........................................................................
Water reservoir capacity: ......................................................
Operation temperature range: ..............................................
Water minimum level: ..........................................................
Environmental conditions: .................................................
Relative humidity: ............................................................

6 Description and usage

The autoclave ST Dry PV 12 litres is an equipment useful for sterilizing processes in
clinics departments and hospitals, of instruments and devices wraped and unwraped,
prions and drying. The software programme provides auto diagnose, protections
against over heating or over pressurizing, and ensure reliability of the sterilization
results. They have a condensed water collection box which keeps the equipment safe.
This autoclave uses the advanced technology of 3 times fractionated and pulsatory
driying vacuum. It enables the hot steam to penetrate into the porous material.

6.1 Location of elements

1
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(It can be modified without notice)
1 Door knob
2 Control panel
2
Page: 20
200X358mm
according to nameplate
121ºC/(1.0-1.3) bar
134ºC/(2.0-2.4) bar
F12A 250V
3.2 litres
0-40ºC
+5ºC to +40ºC
35% to 75%
Tel 34 937 700 877 Fax 34 937 702 362
1L