Tabla de contenido
Publicidad
Instruction Manual
Identification
36" Left Hand
Fence
Angle Pivot - Adjustment arm holds saw assembly.
Rotate to various angle settings from 45˚ to 90˚ to 45˚.
Clamp - Quick slide moulding clamp used to keep
moulding secure for cutting.
Clamp Rods - Clamp support rods.
Fence and Scale - 36" to left section and 18" right
section. The scale is specially designed for measur-
ing 45˚ picture frame miters.
Hold Ups - Device holds up saw so moulding can be
maneuvered on fence.
1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
Rabbet
Section
Frame
Thumb Knob and
Mounting Plate
Tension Knob
Clamp
Stop
Leg
PRO SAW
Front Hold-Up (not seen)
Saw Assembly
Rear Hold-Up
(not seen)
Clamp Rod
Saw Body and
Base Board
Leg - Support for 36" fence section.
Rabbet - Undercut of moulding which holds frame
material.
Saw Assembly - Saw blade is 24 tooth/inch for
precise cutting. Knob allows simple blade change.
Saw Body and Base Board - Main platform of saw.
Stop- Allows moulding to be cut in identical lengths.
Tension Knob - For keeping blade stiff.
Thumb Knob and Mounting Plate - Holding blade to
frame.
Model F100-2
Tension Knob
Frame
Thumb Knob and
Guide Bars
Mounting Plate
18" Right Hand
Angle Pivot
(Not Seen)
Fence
Publicidad
Tabla de contenido
