Prepare The Hood - Best WTT32I Serie Manual Del Usuario

PREPARE THE HOOD

Unpack hood and check contents. You should receive:
1 - Hood Assembly
1 - Decorative Flue Assembly (consisting of upper and lower flue)
1 - Upper Flue Mounting Bracket
2 - Aluminum Grease Filters (installed on hood) (3 - on 48" model)
2 - 50W MR16 GU10 Halogen Lamps (installed on hood) (3 - on 42" & 48" model)
1 - 8" Damper / Duct Connector (for 30" , 36" , 42" models)
1 - 10" Damper / Duct Connector (for 48" model)
1 - Damper Diverter (for 48" model)
1 - Parts Bag containing:
6 - Mounting Screws (4mm x 38mm Cross Recessed Pan Head)
2 - Mounting Screws (4mm x 12mm Cross Recessed Pan Head)
4 - Mounting Screws (4mm x 8mm Cross Recessed Pan Head) (6 for 48" model)
1 - Suction Cup Tool (for bulb installation / removal)
FLUE MOUNTING
1 - DAMPER/DUCT
(8" dia. for 30", 36", &
(10" dia. for 48" model)
1 - DAMPER DIVERTER
UPPER
BRACKET
CONNECTOR
42" models)
(48" model only)
BULB
SUCTION
CUP TOOL
6 MOUNTING
SCREWS
(4mm x 38mm
Cross Recessed
Pan Head)
2 MOUNTING
SCREWS
(4mm x 12mm
Cross Recessed
Pan Head)
4 MOUNTING
SCREWS
(4mm x 8mm
Cross Recessed
Pan Head)
(6 for 48" model)
DECORATIVE
FLUE
ASSEMBLY
- 8 -
HOOD
ASSEMBLY