Festo BW-HSW Serie Manual Del Usuario página 14

2 Installation
Please note
Make sure that the cylinder is fitted free of distortion.
S Observe the specified tightening torques.
S Tighten the screws equally in alternate sequence.
S After fitting, check manually to make sure that the
piston rod can be moved easily and smoothly.
Use shut−off valves in order to make the system
S
pressureless for installation and maintenance work.
Fasten the elements of the kit as follows:
S
14
fasten the stop holder with 2 Allen screws 1 and
fasten the cylinder with 3 Allen screws 2.
Festo BW−HSW−... 0510NH English