Festo BW-HSW Serie Manual Del Usuario página 16

Fitting the pneumatic components
The cylinder is delivered with quick couplings of type
QSML−...
Connect the pneumatic tubing 3 (see illustration on
S
the next page).
Use e.g. the following components:
S
Fasten the tubing outside the area of movement of the
S
HSW−... Secure the tubing with the aid of cable straps,
etc. to the holders of the installation kit type MKRP−...
16
a 5/2−way valve for actuating the cylinder
(basic position: cylinder retracted)
a 5/3−way valve for actuating the drive to the
HSW−... (basic position: drive pressure−neutral)
optional: additional external exhaust restriction to
further reduce the moving−out speed.
Festo BW−HSW−... 0510NH English