Festo CMMP−AS Manual Del Usario página 19

Note
S Using the servo motor controller CMMP−AS only
as a device to be mounted in a control cabinet.
S Mounting position vertical with the mains cables
upwards.
S Maintain a gap of 100 mm both above and below
the motor controller for fitting.
S If the CMMP−AS is subjected to high temperatures,
it must be fastened with a gap of 71 mm.
2.2 Documentation
The following more detailed documentation is available for
the servo motor controller CMMP−AS:
Contents
Hardware
Festo P.BE−K−CMMP−AS 0708NH English
Type
P.BE−CMMP−AS−3A−HW−DE
P.BE−CMMP−AS−3A−HW−EN
P.BE−CMMP−AS−3A−HW−ES
P.BE−CMMP−AS−3A−HW−FR
P.BE−CMMP−AS−3A−HW−IT
P.BE−CMMP−AS−3A−HW−SV
P.BE−CMMP−AS−11A−HW−DE P.BE CMMP AS 11A HW DE
P.BE−CMMP−AS−11A−HW−EN
P.BE−CMMP−AS−11A−HW−ES P BE CMMP AS 11A HW ES
P.BE−CMMP−AS−11A−HW−FR P.BE−CMMP−AS−11A−HW−FR
P.BE CMMP AS 11A HW IT P.BE−CMMP−AS−11A−HW−IT
P.BE−CMMP−AS−11A−HW−SV
Part Language
number
557325 DE
557326 EN
557327 ES
557328 FR
557329 IT
557330 SV
557331 557331 DE DE
557332 EN
557333 557333 ES ES
557334 557334 FR FR
557335 557335 IT IT
557336 SV
19