Assembling Of The Mouth Internal Components; Cleaning And Sanitizating - Skymsen HS-98 Manual De Instrucciones

3.4 Assembling of the mouth internal components

Observe the position of the internal components of the mouth, not to have the
inversion of it, because if this happens, irreparable damage may occur.
To maintain the assembling and disassembling of the internal components:
1 – Put the Screw no. 01 perfectly seated in the tensioning mechanism
2 - Put the Knife Nº02. Observe the counterclockwise cut.
3 – Put Plate 5mm (Optionals 3mm e 8mm) Nº03;
4 – Put Ring Nº04;
5 – Thread the Locking Ring Nº05
01
02
03
04
05
01 – Worm
02 - Knife
03 - Plate 5mm (optionals 3mm e 8mm)

3.5 Cleaning and Sanitizating

The appliance must be totally clean and sanitized:
- Before being used for the first time;
- Before every day operation;
- When it has not been used for a long time;
- Before operating it after a long period of inactivity
10
IMPORTANT
PICTURE 03
IMPORTANT
Always unplug the machine before cleaning.
04 – Ring
05 – Locking Ring