Hansgrohe PuraVida 15775 Serie Instrucciones De Instalación página 4

4 mm
3.
4
2. 4.
1.
3.
1.
English
Flush the hot and cold supplies
(1) Remove the dust cover.
() Open the cold stop using a 4 mm Allen wrench.
() Allow the cold supply to flush for at least five
minutes.
(4) Close the cold stop.
2.
(1) Remove the flushing block using a 5 mm Allen
wrench. Turn it 90° and reinstall.
() Open the hot stop.
() Allow the hot supply to flush for at least 5 minutes.
(4) Close the hot stop.
2.
Installation
Make sure that both stops are
closed.
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛" from
the finished wall surface.
4.
4.