Hansgrohe PuraVida 15775 Serie Instrucciones De Instalación página 6

1.
6
2.
English
Seal the wall around the plaster
shield with waterproof sealant
(1).
Failure to seal the wall can lead to
possible water damage.
Remove the flush insert screw using a 5 mm Allen
wrench ().
Remove the flush insert and seals.
Insert the function block.
Install and tighten the function block screws using a 4
mm Allen wrench.
Measure the distance from the front of the plaster
shield to one of the screw-in flanges ("X").
Add ½" to this measurement.