Safety Regulations - SATA 97921 Manual Del Uso

Safety Regulations:

Warning:
Failure to follow these safety regulations in the operation of the hot air gun may result in fire or explosion, or the operator
suffering electric shock or burns. Before operating the machine, please read these instructions in detail and follow the safety
regulations. Keep these instructions for future reference and give them to any personnel who has not read them
Warning:
If the body of the machine is damaged or dismantled, it may cause fatal electric shock. Do not dismantle the machine without
authorization or use the machine in a damaged condition. Do not drill holes in the enclosure to affix a company nameplate.
Before repairing or maintaining the machine, or replacing any part, be sure to pull out the plug from the socket
Warning:
A damaged power line may cause fatal electric shock
Check the power line regularly. If the power line is damaged, the machine cannot be used. Damaged wires shall be repaired or replaced
by a professional electrician. Do not wrap wires around the body. Wires should be kept away from grease, high temperatures and sharp
edges. Do not hold the wire when carrying the machine. Do not remove the plug by pulling in the wire.
Warning:
Do not use this machine in rainy or damp conditions as this could cause fatal electric shock. Keep the machine dry. If the
machine is out of service, it shall be stored in a dry place. Pay attention to climatic conditions and do not use the machine in
wet restrooms or bathrooms. Do not allow it to make contact with grounded pipelines or such appliances water pipes, heat
sinks, electric stoves or refrigerators
Warning:
If the electric tool is to be used outdoors, a residual current circuit breaker （RCCB） shall be adopted
Warning:
This machine has a risk of explosion. Flammable liquid or gas may be ignited by the hot air gun and cause an explosion. Do not
use this machine in explosion risk locations. The site must be thoroughly checked before starting work, and operation shall
not be conducted near fuel tanks or gas cylinders, even if they are empty
Warning:
This machine has a risk of fire. Flammable materials which are invisible to the naked eye may be ignited by the high heat
emitted from the machine; such materials may be hidden behind formwork or in ceilings, floors or hollow building materials.
Check the work area carefully before starting work. If anything suspicious is found, do not use the hot air gun. Do not allow
the machine to blow hot air in a single fixed position for a long time
Warning:
This machine has a risk of fire. Left unattended while operating, it may ignite nearby items. It shall be monitored at all times
while operating. Turn off and vertically erect the machine to facilitate cooling. Operators must ensure that the machine is
completely cooled
97921/97922/97923
中文
EN DE RU KO PT JA ES
11