SATA 97921 Manual Del Uso página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
2 )When allowing the machine to cool, set power switch 1 to gear II and turn thermostat switch 2 to MIN. After the machine is
completely cooled, move power switch 1 to position O.
3 )Allow the machine to cool and let it run at the "COOL DOWN" position (refer to "Settings"). After the machine is completely
cooled, move power switch 1 to position O.(Set C on screen 2)
Press the "SELECT" (Menu) key before choosing options.
Note:
If the item starts to flash, change the item with the "PLUS" and "MINUS" keys, and press the "SELECT" key again to enter the
next step.
Select language and temperature :
Select function :
1 )1-free
2 )2-free
3 )Shrinking
4 )Deforming
5 )Soldering
6 )Drying
7 )Paint removal
8 )Welding PPEPDM
9 )Welding HD-PE
10)Welding PP
1 1 )Welding PVC-U
12)Welding ABS
13)Welding PC3
14)Welding plastic floors and film
After the function is selected, the title of the function will start to flash.. The long string will begin to move on the pre-display screen 2
seconds after the function flashes. When the string finishes 2 laps, it will rejoin the title. When the string is moving, you can adjust the
temperature or air flow using the "SELECT" key.
Select STANDBY or COOL DOWN:
STANDBY may be selected if work is temporarily interrupted. The power consumption may be reduced after the machine enters operation
status.
Make sure you switch the machine to COOL DOWN when the work is complete. When the machine has cooled down completely, turn it off
and remove the plug from the socket.
Application
1 -free
16
97921/97922/97923
80℃ /5
80℃ /5
450℃ /5
500℃ /5
650℃ /5
650℃ /5
425℃ /5
280℃ /5
300℃ /5
320℃ /5
340℃ /5
360℃ /5
70℃ /5
450℃ /5
Operation Settings for 97923
Temperature(℃)
中文
80-650
EN
DE
RU
KO
PT
Quantity
1-5
JA
ES

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

9792297923

Tabla de contenido