Troubleshooting - KlipXtreme Placid KNH-250 Manual Del Usuario

• To reject or ignore an incoming call, press and hold the Multifunction button
for about 1 second.
• If you want to redial the last number called, quickly press the Multifunction
button twice.
2. Music playback
• Briefly press the Multifunction
playback.
• Press and hold the +/>>l and –/l<< buttons to go to the Next or Previous track.
• Press briefly the +/>>l and –/l<< buttons to increase or decrease the audio
level on the headphones.
• When listening to music using your mobile phone, playback will pause to allow
the call to go through.
• As soon as you hang up, music playback will resume automatically.

Troubleshooting

Problem
The device is not
The battery level might be low. Please recharge the
turning on.
battery.
Batteries are not Check that the source device is ON, or adaptor is
correctly used.
being charged.
Check that the micro-USB cable is securely connected.
button to reproduce and stop audio
Solution
Problem
The device is not
Place the wireless headphones and Bluetooth® device not
pairing.
more than one meter away from each other.
The device can't
Confirm the headphone is under the pairing mode.
connect to the
Confirm that the Bluetooth® function is turned ON in
Bluetooth® mode
your source device. Input code"0000" when requested.
There is no sound
Confirm that the connection with the Bluetooth® device is
when playing music.
set for profile A2DP.
Confirm that volume controls on both, the wireless
headphones and source device are set to the appropriate
levels.
Sound is distorted Check that no other devices using the 2.4GHz
wavelength are nearby, and that there are no obstacles
when playing music.
blocking the signal path.
Can't use the Confirm that the wireless headphones and Bluetooth®
device are connected using the profile HFP or HSP. If the
hands-free mode.
Bluetooth® device is connected in profile A2DP, it may be
necessary to change connection profiles (depending on
the specifications of the Bluetooth® device).
Solution