Husqvarna 436 Li Manual Del Usuario página 37

Ocultar thumbs Ver también para 436 Li:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

chain and be whipped toward you or pull you off
balance.
When cutting a limb that is under tension be alert for
springback so that you will not be struck when the
tension in the wood fibers is released.
Keep handles dry, clean and free of oil or fuel mixture.
Operate the chain saw only in well-ventilated areas.
Do not operate a chain saw in a tree unless you have
been specifically trained to do so.
Do not operate a chain saw above shoulder height.
All chain saw service, other than the items listed in the
operator's/owner's safety and maintenance instructions,
should be performed by competent chain saw service
personnel. (For example, if improper tools are used to
remove the flywheel or if an improper tool is used to hold
the flywheel in order to remove the clutch, structural
damage to the flywheel could occur and subsequently
cause the flywheel to burst.)
When transporting your chain saw, use the appropriate
guide bar guard.
Note: This Annex is intended primarily for the consumer
or occasional user.
481 - 001 - 22.01.2018
37

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

536 lixp

Tabla de contenido