Rowenta ULTRASTEAM Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning ! Never use 100%, distilled or demineralised water as this
can cause the appliance to spit and leak.
• Remove the water tank by pushing it backwards.
• Unplug the rubber stopper.
• Fill the watertank to the top with water and close it securly. Make sure
that the buckler is properly pushed in place - as shown below.
Important: Heat concentrates the elements contained in water
during evaporation. The types of water listed below may contain
organic waste, mineral or chemical elements that can cause
spitting, brown staining, or premature wear of the appliance:
water from clothes dryers, scented or softened water, water
from refrigerators, air conditioners, rain water, boiled, filtered or
bottled water. Also use distilled or demineralised water only as
advised above.
• Put the tank into the handle until it snaps in.
• Completely unwind the power cord.
• Plug in your steam brush.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido