After Use - Rowenta ULTRASTEAM Manual De Instrucciones

• Gently press the fabric brush against the
clothing and move the steambrush down the
fabric. Keep pressing the burst of steam button.
• The combination of steam and fabric brush will
gently remove the wrinkles.
• After treatment, let the garment cool down on
the hanger before wearing.
Do not allow steambrush to run dry.
Lint pad
The lint pad must not be used when attached to appliance.
Threads, lint and hair can easily be removed with the lint pad by brushing
the clothes slowly from left to right.
The pad can be cleaned by brushing in the opposite direction right to left
on a scrap of old cloth.
Warning: Never touch the steam head until it cools completely.
• Remove the lint pad from the steam brush by
grasping on both sides and pulling downwards.
The lint pad should slide right off of the brush,
and clamp back on after use.
• For storage, attach the lint pad to the steam
brush by lining up the slots of the brush with the
slots of the lint pad. Gently push the top of the
lint pad into place until it snaps in.

After use

• Unplug the appliance. Empty the water remaining in the tank and leave
unit on its side to cool. After the appliance has cooled down, it may be
stored in the bag provided (depending on model).
Warning: never forget to unplug your device and empty the tank after
your working session. While not in use, you can hang you steambrush
by its hook.