KTM Power Parts 75612945000 Instrucciones Para El Montaje página 6

7
2
1
8
6
14
14
14
18
1
18
14
3
5
4
6
9
10
12
13a
16
11
13b
15
16
13b
13b
17
Scope of supply 75612945100:
1x assembly kit
1x air box bracket (1)
1x air filter bracket (2)
1x SLS plug (3)
1x hexagon nut DIN985 M6 A2 (4)
1x supporting plate DIN988 6x12x1 (5)
1x K&N air filter (6)
1x camshaft (7)
5x cable ties 140x3.5mm
Scope of supply 75612945000:
Same as 75612945000 plus:
1x Akrapovic main silencer
1x Akrapovic titanium manifold
This tuning kit requires changes in the camshaft and uploading of the appro-
priate mapping. This work should be carried out by an authorized workshop
or a qualified service technician only!
Preparations
- Remove the seat (8).
- Remove the grab handles (9) on the left and right.
- Remove the side covers on the left (10) and right.
- Detach the hose (11) on the left and right.
- Release the hose clip of the intake trumpet (12).
- Disconnect the plug-in connection of the temperature sensor.
- Remove the fixing screws (14) and (15) of the air box.
- Remove the screws (13a) and (13b) on the left and right.
- Turn the rear outrigger (16) to the side and remove the air box.
- Open the air box and remove the temperature sensor (17).
Assembly
The camshaft may be removed and mounted and the mappings may be
uploaded only by an authorized workshop or a qualified service technician!
NOTE:
To mount the Akrapovic system, see the Power Parts Manual (included with
the Acrapovic system).
To mount the camshaft, see the Repair Manual.
- Mount the air box bracket (1) onto the lower section of the air box using
the original screws (18).
- Position the rear outrigger (16) and attach it at the top left and right using
the original screws (13a).
NOTE:
Do not tighten the screws.
- Fold the rear outrigger forward.
- Position the lower section of the air box in the rear outrigger and mount
using the original screws (15) and (14) (Loctite 243).
- Fold the rear outrigger back and mount the rear outrigger at the bottom
using the screws (13b).
- Tighten the screws (13a) and (13b).
NOTE:
Tighten the screws (13a) (35Nm, Loctite 243)
Tighten the screws (13b) (45Nm, Loctite 243).
75612945050
75606915000
76236010044
44011176140
75605099100
75605907000