Wetrok Top Sweep 255 Instrucciones De Manejo página 14

Top Sweep 255
Dear Customers,
Thank you for choosing one of our efficient and maintenance-friendly sweeping systems. This machine is especially designed for even, hard floors.
Thanks to the flat circular brooms, all kind of street dirt, for exemple cigarette packets and cigarette-stubs, disposable handkerchiefs, fine gravel, sand,
wood pieces as well as wet leaves will be whisked in. Along edges, the "TOP SWEEP 255" will be led by lateral guide rollers (1.05).
ASSEMBLY
Remove sliding handle parts (7.02) from the box. Connect the U-tube with the two connecting tubes. Adjust stop spring (7.01) to the desired position.
Affix the mounted handle with the attachment screws (1.02) on the right and on the left side of the front part of the machine. Now, you can sweep with
normal walking speed. The circular brooms sweep in front of the machine.
ADJUSTMENT
The adjusting knob (1.01) for the circular brooms is arranged in the middle of the front part of the machine. Steps 1 – 2: new brooms, for all even, hard
floors (e.g. asphalt, concrete, floor tiles.......) Steps 3 – 4: new brooms, for wet leaves, sand, uneven floors (e.g. exposed aggregate concrete tiles).
Steps 5 – 8: older brooms, for readjusting the level of wear. We recommend shifting the knob one step at a time only. Do not press the circular brooms
too heavily upon the ground in order to avoid a rapid wear and tear of the drive. While sweeping, the carrying capacity of the wast container can be
increased by lifting the front of the sweeping machine so that the wast is moved to the back the container. When sweeping fine dust, it may happen that
a small trace of dust remains in the middle of the sweeping machine. In this case, sweep the outside of this track together with the next section to be
swept. In this way, the sweeping surface will be cleaned uniformly and thoroughly.
EMPTYING THE WASTE CONTAINER
Slightly incline the sliding handle forward. Pull the container handle (6.05) upward and remove the waste container.
When inserting the container, incline the sliding handle forward and arrest the container at the front part by means of the container handle.
STORAGE
Hang up the sweeping machine with the handle so as to save space or store it on the back side of the container.
MAINTENANCE
You have decided in favour of a maintenance-free product. The circular brooms as well as the drive can be cleaned with water. Spooled cords, threads
etc. must be removed.
Never lubricate the drive !
– With the original silicone lubricant an easy motion and a long service life of the machines is ensured.
– Minor repairs can be carried out by yourself without any problems.
14
• EN