Broan Best Instrucciones De Instalación página 5

NON-DUCTED
RECIRCULATION FILTERS
INSTALLATION
Non-ducted Recirculation
1. Purchase a non-ducted recirculation filters
(B03300502) from your dealer.
2. Install the filters: push the filter against the
spring and rotate it up.
MAINTENANCE
Proper maintenance of the Range Hood will
assure proper performance of the unit.
Grease Filters
The grease filters must be cleaned
approximately once every 30 hours of
operation (when the icon D1 goes on).
Use a warm detergent solution. Grease filters
is dishwasher safe.
Remove the filters: pull the handle outside
and unlock the filter.
Non-ducted Recirculation Filters
The non-ducted recirculation filters should be changed whenever the icon D10
starts blinking (i.e. every 120 hours of operation).
To remove the filters, pushing them against the spring and rotating down.
Hood Cleaning
Cleaning tips:
Warm water with mild detergent is all that is usually needed.
Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to
avoid water marks.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes.
DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact for extended periods. Many of these compounds contain chemi-
cals which may be harmful. Rinse with water after exposure and wipe dry with a
clean cloth.
NON-DUCTED
RECIRCULATION FILTERS
GREASE FILTERS
- 5 -