Identification; Marking; Eu Declaration Of Conformity; (En) Ec Declaration Of Conformity - Abicor Binzel xFUME ADVANCED Manual De Instrucciones

®
xFUME ADVANCED

1 Identification

The xFUME
result from the welding, cutting and grinding processes. The device may be operated only with original
ABICOR BINZEL spare parts. These operating instructions describe only the xFUME
extraction system.
When used in these operating instructions, the terms "device", "product", and "fume extraction system"
always refer to the xFUME
115 V versions.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.

1.2 EU declaration of conformity

From June 2021
®
ADVANCED fume extraction system is a mobile solution for extracting fumes and dust that
®
ADVANCED fume extraction system. The device is available in 230 V and

(EN) EC Declaration of Conformity

Translation of the original German declaration of conformity
Manufacturer Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
Authorized person for the Hubert Metzger
technical documentation
Address – see address of manufacturer
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product Description The xFUME ADVANCED extraction system is used to extract welding,
cutting and grinding fumes.
Designation
Fume extraction system
Trade name xFUME
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union harmonisation 2006/42/EC Machinery
legislation
2014/30/EU EMC
2011/65/EU RoHS
2009/125/EC Ecodesign
Harmonized standards used EN ISO 12100:2010
EN ISO 15012
EN ISO 13857:2018
EN 61000-6-2:2005
EN 61000-6-4:2007
EN 61000 A1:2011
EN 50581:2012
Harmonized national standards
and technical specifications
Alten-Buseck, 22.03.2021
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving: Document no.: 09-03-2021
Function
System for the extraction of
welding, cutting and grinding
fumes.
®
Type ADVANCED
Source of information
(Filing L96 from 29.03.2014)
(Filing L96 from 29.03.2014)
(Filing L174 from 01.07.2011)
(Filing L204 from 21.07.1998)
22-March-2021
1 Identification
®
ADVANCED fume
Page 3 of 28
EN - 3