Nameplate; Signs And Symbols Used; Classification Of The Warnings - Abicor Binzel xFUME ADVANCED Manual De Instrucciones

Ocultar thumbs Ver también para xFUME ADVANCED:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1 Identification

1.3 Nameplate

Fig. 1
The device is labeled by means of a nameplate on the housing.
► You will need the device type, device number and year of manufacture for inquiries.

1.4 Signs and symbols used

The following signs and symbols are used in the operating instructions:
1
A

1.5 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. The following signal words are used depending on the type of hazard:
W
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
W
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
W
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or material damage and indicates irreparable damage to the
device or equipment.
From June 2021
EN - 4
Nameplate
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further information.
Caption, item description.
DANGER
WARNING
CAUTION
®
xFUME
ADVANCED

Publicidad

Tabla de contenido
loading

Tabla de contenido