Ac Voltage; Dc Current; Resistance; Diode - Surtek MUL04 Manual De Usuario Y Garantía

Remark: Input impedance: 10 MΩ.
b. AC Voltage
RANGE RESOLUTION
2 V 1 mV
20 V 10 mV
200 V 100 mV
750 V 1 V
Remarks:
• Input impedance: 10 MΩ.
• Frequency response: 40Hz ~ 400Hz.
• Displays effective value of sine wave (mean value response).
c. DC Current
RANGE RESOLUTION
200 mA 0.1 mA
10 A 10 mA
Remarks:
• At 10 A Range:
For continuous measurement
measurement greater than 15 minutes.
d. Resistance
RANGE RESOLUTION
200 kΩ 0.1 Ω
2 kΩ 1 Ω
20 kΩ 10 Ω
200 kΩ 100 Ω
2 MΩ 1 kΩ
20 MΩ 10 kΩ
e. Diode
RANGE RESOLUTION
1 mV
Remarks:
• Open circuit voltage approximate 2.7 V
• The silicon PN junction normal voltage is about 500 mV to 800 mV
f. Continuity Testing
RANGE RESOLUTION
1 Ω
Remarks:
• Open circuit voltage approximate 2.7 V.
• The buzzer does not sound when the resistance value is >50 Ω. The circuit is
disconnected.
• The buzzer sounds continuously when the resistance value is
is in good condition.
g. Dwell Testing
RANGE RESOLUTION
4 CYL
6 CYL 0.1°
8 CYL
46
ACCURACY
± (0.8% + 5)
1000 VDC o 750 VAC continuous.
± (1.0% + 4)
ACCURACY
CE: Fuse 315 mA, 250V,
± (0.8% + 5)
fast type, ø5 x 20mm
CE:Fuse 10 A, 250 V,
± (1.2% + 5)
fast type, ø5 x 20 mm
10 seconds and interval time between 2
ACCURACY
± (0.8% + 5)
± (1.5% + 5)
OVERLOAD PROTECTION
600 Vp
OVERLOAD PROTECTION
600 Vp
ACCURACY
± (3.0% + 5)
OVERLOAD PROTECTION
OVERLOAD PROTECTION
OVERLOAD PROTECTION
600 Vp
30 Ω. The circuit
OVERLOAD PROTECTION
600 Vp