Xerox 550 Guia De Instalacion página 6

1. Switch the power off by pressing the power
switch located on the front lower right of the
printer to the <O> position.
Unplug the power cord from the power
outlet and the printer.
2. Slowly pull out the tray 1 until it stops. Hold
the tray with both hands, lift it up slightly,
and pull it out completely.
Important
• Do not pull out more than one tray at a time.
Otherwise, the printer may topple over.
3. Remove the two clips on the back side and
the one clip on the inner right side of the
printer.
Note
• Keep the clips in case you ever re-install the sheet
feeders.
4. Release the upper tab of the clip on the
inner left side of the printer. Tilt the tab
towards the inside of the printer.
6