Yakima KingJoe Pro 2/3 Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BOTTOM HOOKS: Glass Hatch Adapter installation instructions
A
Remove the
caRRieR fRom
the caR.
UNBUCKLE AND PULL LOWER STRAPS COMPLETELY OUT OF THE HUB.
B
OPEN THE
TRUNK
DOOR.
D
BEFORE CLOSING THE TRUNK:
Be sure the pads are free from
contact between trunk door
and vehicle's frame.
E
Now that you've installed the bottom glass hatch adapters continue to STEP 5.
If you need Glass Hatch Adapters to replace both top and bottom hook straps, see your
dealer, or go to www.yakima.com to purchase a second set of Glass Hatch Adapters.
1033584C-6/30
Confirmed your vehicle does not require
Glass Hatch Adapters? Skip this page.
2x
C
Insert new strap through hub as shown. Thread new
strap back through buckle to re-attach side hooks.
Position the pads
inside the trunk
with the straps
hanging free.
• Close the trunk.
• Pull firmly on the straps
2x
to seat the pads.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kingjoe pro 2Kingjoe pro 38002624

Tabla de contenido