Warranty Policy - Surtek HL720 Manual De Usuario Y Garantía

Water too hot: Reduce temperature (see techni-
cal data).
OIL LEAKAGE
Seals worn: Contact your nearest Authorized
Service Center.
MOTOR STARTS EVEN WITH GUN TRIGGER IS
RELEASED
Nozzle clogged: Clean nozzle.
High pressure system or pump hydraulic circuit
not watertight: Contact your nearest Autho-
rized Service Center.
* If the engine turns on and does not come back
on during the operation, wait for 2 to 3 minutes
before turning the tool on again (the overload
function has been activated). If the problem is
recurring more than once, contact your nearest
service center.
16