Inspecting The Device For Damage In Transit; Recommissioning After Transport And Storage - NARDA SignalShark 3330 Instrucciones De Manejo Y Seguridad

• Wall-mount adapter
Kit contains:
– 2 x L brackets
– 12 x cylindrical head screws M6
– 12 x spring washers M6
• Mast-mount adapter available separately (for mounting on a pole or mast
with a diameter of 48 mm to 200 mm)
Kit contains:
– 2 x U brackets
– 4 x U profiles
– 4 x threaded rods M12
– 12 x cylindrical head screws M6
– 12 x spring washers M6
– 4 x hexagon bolts M12
– 20 x hexagon nuts M12
– 8 x spring washers M12
– 4 x plain washers M12
 Check that you have received all items listed. Contact your supplier if
anything is missing.
4.3

Inspecting the device for damage in transit

 After unpacking, inspect the device and accessories for any damage in
transit. Damage could have occurred if the packaging itself has clearly
been damaged.
 Do not attempt to use a damaged device.
4.4

Recommissioning after transport and storage

The device is not ready for use until it has reached a temperature in the
specified operating range. The temperature ranges can be found in the rele-
vant datasheets.
54 SignalShark 3330 Outdoor Unit
Narda