Blinking Red LED Indicator?
1.
Remove the Battery from the Charger Pocket.
a.
Verify that the Battery is a Motorola Solutions Battery
listed in Table 1 on page 4.
b.
Inspect the electrical contacts on the Battery.
c.
Inspect the electrical contacts in the Charger Pocket.
d.
Firmly reinsert the Motorola Solutions Battery into the
Charger Pocket.
e.
If the indication persists, then contact the Motorola
Solutions representative.
Blinking Orange LED Indicator?
Wait.
The Battery temperature will recover to the allowable range for
resumption of charging.
Or, the charger will recover the Battery from the
over-discharged condition.
Note: Charging outside of the stated temperature and voltage limits
can drastically reduce the life expectancy of the battery.
When the battery charger detects the proper battery conditions,
charging begins automatically (steady red LED).
SERVICE
Do not disassemble the Dual-Unit Charger; it is not repairable
and replacement parts are not available. Order replacement
chargers as necessary.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their
respective owners.
© 2012 and 2017 Motorola Solutions, Inc. All rights reserved.
11